Designed to meet most of the needs of jewelers and metalsmiths, the versatile Compact Economy Rolling Mill. This model includes two sets of 43 mm dia., hardened steel rolls, both 76 mm wide. The installed set of rolls is flat while the additional set is grooved for forming wire. Plus 4 more including a pattern roll. The mill also features 4:1 gear reduction. Gears are covered, in conformance with OSHA regulations. Two holes are provided in the base of the mill for bolting to your workbench.

  • Gear Ratio 4:1
  • Roll Diameter 43 mm
  • Roll Width 76 mm
  • Maximum thickness 2.5 mm
  • Wire Rolls Grooves from 0.77 mm to 4.3 mm wide
  • Dimensions 8.5" x 8.5" x 12" high (without handle)


Rolling Mill is in great condition, always greased as well as the rollers.

Some rollers may need a KEY WAY repair as this can be done at a machine shop whereas they weld a piece of steel then grind it down to make the shape of the groove so, the key can catch the roller to spin it.


You can still use the rollers although for some, you may need to turn the other direction in order for it to spin.


All grooves on the rollers are inprestine condition.


Soft copper, silver, zinc & tin were only used, nothing heavy.


The covers are off for a reason, you can put them back on although for each time you want to replace rollers, you must remove both covers everytime so, it's best to leave them off especially for a quicker change.


If you notice a waxy substance on the rollers & in the roller grooves, it's just grease.

Compact Economy Rolling Mill With 6 Rollers




    Powerline & Sample Rd

    Fl. Broward, 33064


    Pickup Times:

    Mon - Fri [10am-7pm

    Sat & Sun [10am-5pm


    Chat Available:

    Mon - Sun 24/7

    Most available times - 11am-11pm


    Phone# will be provided after scheduling

    00:00 / 02:10

    2020 Ryanes.Com All Rights Reserved.